|
Characteristics of Quick Therm Underlay:
Material: Non-cross linked premium
quality polyethylene foam of very high density. Produced without CFC
and HCFC.
Application: Excellent suited for
floorings with clic-system. Application in rooms with highest
frequentation like commercially used buildings. For high
requirements on walking noise reduction and impact sound insulation
as swell as long term load-bearing capacity. Especially recommended
for under floor heating system!
Characteristic: Elastic, impact
sound insulating, walking noise absorbing, pressure-loadable, water
repellent, moisture proof, fine closed cell-structure, 100%
recyclable.
Durability: Water, most domestic cleaners, solutions of salt,
acids, bases, partly durable against organic solvents and
hydrocarbons.
Storage conditions: Do not store outdoors, protect from exposure of
sunlight. After manufacturing foam will yield small mounts of
Iso-butane over a certain period depending on the environmental
conditions (temperature/ventilation). Iso-butane is volatile and
diffuses within a few days from the product after end of production.
Highly inflammable isobutene can be released by product during
transport and storage. Iso-butane is volatile and diffuses within a
few days from the product after end of production. Highly
inflammable Iso-butane can be released by the product during
transport and storage. Iso-butane vapours are heavier than air, gas
concentration accumulated at ground level. The material should be
stored in well ventilated room. Avoid electro statical discharges.
Keep away from ignition source. Don’t smoke! |